| IDX |
ITEM |
FD501D-CS00 |
| 1 |
Engine Type |
Liquid
cooled, 4-cyc.,OHV,Vertical |
| 2 |
No. of Cyl. |
2 ( 90 degree, V - Twin
) |
| 3 |
Engine Displacement |
437 cc ( 26.7 cu.in. ) |
| 4 |
Bore x Stroke |
67
x 62 mm ( 2.64 in x 2.44 in ) |
| 5 |
Compression Ratio |
9.3
: 1 |
| 6 |
Max. Output |
16.0 hp ( 11.8 kw ) / 3600
rpm--SAE J1349 |
| 7 |
Max Torque |
24.1
ft-lbs ( 32.6 N.m ) / 2800 rpm |
| 8 |
Min Fuel Consumption Ratio |
230
gr/hp.hr ( 313 gr/kw.hr ) |
| 9 |
Direction of Rotation |
Counter
clockwise facing the PTO |
| 10 |
Compression Release |
TCR |
| 11 |
Governor |
Mechanical governor |
| 12 |
Lubrication |
Pressure Lubrication |
| 13 |
Balancing |
Per V - Twin configuration |
| 14 |
Oil capacity |
1.3
L ( 2.7 US.pt ) |
| 15 |
Off level operation |
Max.
25 degrees all directions |
| 16 |
Engine Mounting Hole (mm ) |
4 - M8 x P1.25 |
| 17 |
PTO |
Straight
: Dia. 25.4mm(1.12in) x L
80mm |
| 18 |
PTO Thread Size |
M10
x P 1.5, Depth 25 mm |
| 19 |
PTO
Flange |
4-3/8-16 UNC |
| |
PTO Pilot Diameter |
5.75 in. (146.075 mm) |
| 20 |
Air cleaner |
Dry type ( Paper ), Dual
Stage Element |
| 21 |
Air cleaner inlet |
With (L-type inlet, Shipped
Loose) |
| 22 |
Muffler |
Shipped Loose |
| 23 |
Mounting hardware for muffler |
Flange, Nuts, Washers and
Studs |
| 24 |
Exhaust gasket |
Installed |
| 25 |
Electric Starter |
Solenoid
Shift type |
| 26 |
Ignition |
Battery,Full Transistor,Fixed
timing |
| 27 |
Charging coil |
12 V - 15 amp |
| 28 |
Fuel Pump - Gasoline |
Pulse type pump |
| 29 |
Spark plug |
BPR4ES |
| 30 |
RFI |
Per
CANADA and U.S.A requirements |
| 31 |
Carburetor |
Side draft type,Fixed Main
Jet,Outer Vent |
| 32 |
Carb. shut off solenoid
switch |
Included |
| 33 |
Vent extension tube on
carburetor |
Included |
| 34 |
Control Panel |
Push-pull type, Low speed
Governor |
| 35 |
Choke control - Gasoline |
Separate remote type |
| 36 |
Oil pressure switch |
Close on Low Pressure |
| 37 |
Oil drain |
Remote Value |
| 38 |
Oil filter |
Spin - On filter |
| 39 |
Dip stick & Oil fill |
Included + Separate |
| 40 |
Radiator |
Installed |
| 41 |
Cooling fan |
Installed, Pulls air though
radiator |
| 42 |
Flywheel cover |
Not Required |
| 43 |
Radiator Pre-screen |
14037-2130 |
| 44 |
Thermo switch |
Close on High Temperature |
| 45 |
Decal |
|
| |
a) Brand |
With (New decals with H.P.) |
| |
b) Bar Code |
Standard |
| |
c) Oil Maintenance |
English |
| |
d) Air Cleaner Maintenance |
English |
| |
e) Warning |
None |
| |
f) CARB Emission Label |
With |
| 46 |
Voltage Regulator |
installed (Open Type) |
| 47 |
Optional Part |
|
| |
a) Key ( PTO ) |
Shipped Loose |
| |
b) Bolt ( PTO ) |
Shipped Loose |
| |
c) Washer ( PTO ) |
Shipped Loose |
| |
d) Fuel Filter - Gasoline |
Installed |
| |
e) Connector ( Regulator ) |
Installed |
| |
f) Terminal ( Regulator) |
Installed |
| |
g) Nut ( on B - terminal,
Starter ) |
Shipped Loose |
| |
h) Washer(on B - terminal,
Starter ) |
Shipped Loose |
| |
i) Tool Kit |
Without |
| |
j) Manual ( operator's ) |
Included |
| |
k) Overflow Bottle |
Installed |
| 48 |
Engine speed set --- High
speed |
3600 rpm |
| |
--- Low speed |
1550 rpm |
| 49 |
Ship loose part |
Bolt and Washer (PTO) |
| |
|
L-type inlet and Clamp (A/C) |
| |
|
Nut and Washer (Starter
B-Terminal) |
| 50 |
Special Specifications |
Counter-Bore added to Valve
Guide |
| |
|
Valve Spring Stiffness
Increased |
| |
|
Steel Cam Gear |
| |
|
Glass Fiber re-inforced
Governor-Gear |
| 51 |
Dimension
( L x W x H ), |
440mm x 358mm x 458mm |
| |
With
Muff. |
(17.32 x 14.09 x 18.03 in.) |
| 52 |
Net weight |
35 kg (77.1 lbs) |
| |
|
|
