| IDX |
ITEM |
FD620D-BS19 |
| 1 |
Engine Type |
Liquid
cooled, 4-cyc.,OHV,Horizontal |
| 2 |
No.of Cyl. |
2 ( 90 degree, V - Twin
) |
| 3 |
Piston Displacement |
617
cc ( 37.7 cu.in. ) |
| 4 |
Bore x Stroke |
76
x 68 mm ( 2.99 in x 2.66 in ) |
| 5 |
Compression Ratio |
9.0
: 1 |
| 6 |
Max. Output |
20.0 hp ( 14.9 kw ) / 3600
rpm--SAE J1349 |
| 7 |
Max Torque |
32.9
ft-lbs ( 44.6 N.m ) / 2200 rpm |
| 8 |
Min Fuel Consumption Ratio |
245
gr/hp.hr ( 329 gr/kw.hr ) |
| 9 |
Direction of Rotation |
Counter
clockwise facing the PTO |
| 10 |
Compression Release |
TCR
( Thermal Compression Release ) |
| 11 |
Governor |
Mechanical governor |
| 12 |
Lubrication |
Pressure Lubrication |
| 13 |
Balancing |
Per V - Twin configuration |
| 14 |
Oil capacity |
1.5L
( 3.2 US.pt ) |
| 15 |
Off level operation |
Max.
30 degrees all directions |
| 16 |
Engine Mounting Hole (mm ) |
4 - M8 x P1.25(2---18 deep,
2---16.5 deep) |
| 17 |
PTO |
Straight
: Dia. 28.5mm(1.12in) x L
80mm |
| 18 |
PTO
Flange |
8-- M8x1.25 |
| |
PTO Pilot Diameter |
5.75 in. (146.075 mm) |
| 19 |
Air cleaner |
Dry type ( Paper ), Dual
Stage Element |
| 20 |
Air cleaner inlet |
With L-type intake
hose(Shipped Loose) |
| 21 |
Muffler |
Shipped Loose |
| |
Exhaust Pipe |
Shipped Loose |
| |
Spark Arrestor |
Shipped Loose |
| 22 |
Mounting hardware for muffler |
Flange Stud, Nut ,Washer
Installed |
| 23 |
Exhaust gasket |
Shipped Loose |
| 24 |
Electric Starter |
Solenoid Shift type |
| 25 |
Ignition |
Battery,Full Transistor,Fixed
timing |
| 26 |
Charging coil |
12 V - 20 amp |
| 27 |
Fuel Pump - Gasoline |
With electric fuel pump (
shipped loose ) |
| 28 |
Spark plug |
BMR4A |
| 29 |
RFI |
Per
CANADA and U.S.A requirements |
| 30 |
Carburetor |
Down draft type,Fixed Main
Jet |
| 31 |
Carb. shut off solenoid
switch |
Included |
| 32 |
Vent extension tube on
carburetor |
Without, Inner Vent System |
| 33 |
Control Panel |
Heavy duty type |
| 34 |
Choke control - Gasoline |
Separate type, Same as above |
| 35 |
Oil pressure switch |
Close on Low Pressure |
| 36 |
Oil drain |
3/8 -18 NPTF Thread flywheel
side |
| 37 |
Oil filter |
Full flow filter |
| 38 |
Dip stick & Oil fill |
Included and Separate |
| 39 |
Radiator |
With, Heavy duty brackets |
| 40 |
Cooling fan |
Pulls
air through radiator |
| 41 |
Flywheel cover |
With Finger guard type |
| 42 |
Thermo switch |
Close on High Temp. |
| 43 |
Decal |
|
| |
a) Brand |
With (Black/Red) |
| |
b) Bar Code |
Standard |
| |
c) Oil Maintenance |
English |
| |
d) Air Cleaner Maintenance |
English |
| |
e) Warning |
None |
| |
f) Exhaust gas emission |
Included |
| 44 |
Voltage Regulator |
With installed on starter
side. |
| 45 |
Optional Part |
|
| |
a) Key ( PTO ) |
Shipped Loose |
| |
b) Bolt ( PTO ) |
Shipped Loose |
| |
c) Washer ( PTO ) |
Shipped Loose |
| |
d) Fuel Filter - Gasoline |
Without |
| |
e) Connector ( Regulator ) |
installed |
| |
f) Connector ( Fuel Pump ) |
Shipped Loose |
| |
g) Terminal ( Reg. &
F.Pump ) |
shipped Loose |
| |
h) Nut ( on B - terminal,
Starter ) |
Shipped Loose |
| |
i) Washer(on B - terminal,
Starter ) |
Shipped Loose |
| |
j) Cover (on B - terminal,
Starter ) |
Without |
| |
k) Tool Kit |
None |
| |
l) Manual ( operator's ) |
Shipped Loose |
| |
m) Overflow Bottle and Tube |
Installed |
| 46 |
Engine speed set --- High
speed |
3500rpm
--- 3700rpm |
| |
--- Low speed |
G.V
1450rpm ---
1650rpm |
| 47 |
C.A.R.B. Certification -
Gasoline |
With |
| 48 |
Ship loose part |
Fuel Pump( In -Line ), |
| |
|
L-type (A/C), Clamp( A/C ) |
| |
|
Bolt( PTO ),Washer( PTO ),
Key(PTO) |
| |
|
Connector( Fuel Pump ) |
| |
|
Terminal(Fuel Pump) |
| |
|
Nut( B terminal, Starter ) |
| |
|
Washer( B terminal, Starter ) |
| |
|
Gasket ( Muffler ) |
| |
|
Muffler and Ex.pipe |
| |
|
Owner's Manual |
| 49 |
Dimension ( L x W x H ) |
507
( 20.0 ) x 448 ( 17.6 ) x 624 ( 24.6 ) |
| 50 |
Net weight |
38.3kg
( 84.4 lbs ) |
| |
|
|
